Home Page >  High Voltage Test Systems > Energy Cable Monitoring Systems > OMS 800 System > 

OMS 800 System

OMS 800 System
OMS 800 System

The OMS 800 system is designed to perform partial discharge (PD) after-installation testing and continuous monitoring of HV XLPE cable systems, either in underground tunnels or at buried cables. It can detect and locate partial discharges in cables and accessories (joints, terminations) simultaneously.

The OMS 800 monitoring system consists of sensors, acquisition units, data concentrators for pre-processing the data, as well as a system server and software components for modern data visualization and management. An inductive power supply (IPS) allows operating the acquisition units offside, e.g. in cable tunnel applications where copper wiring has to be avoided and voltage sources are not available.

  • Intelligent pre-processing of the raw data by concentrator unit
  • Advanced data separation by synchronous multi-channel (3PARD) and multi-spectral (3CFRD) evaluation
  • Data post-processing by expert system to get useful information about insulation conditions
  • Diverse HFCT sensors for installation at groundings or cross-bonding boxes
  • Inductive power supply (IPS) for offside supply of units
Applications 
  • Monitoring of partial discharge phenomena at cable systems (High-voltage cable and accessories)
  • Maintenance of HV assets (service)
 
Marke Elektronik 2016 © All Rights Reserved.
TR - EN 
Home Page >  High Voltage Test Systems > Energy Cable Monitoring Systems > OMS 800 System > 

OMS 800 System

OMS 800 System
OMS 800 System

The OMS 800 system is designed to perform partial discharge (PD) after-installation testing and continuous monitoring of HV XLPE cable systems, either in underground tunnels or at buried cables. It can detect and locate partial discharges in cables and accessories (joints, terminations) simultaneously.

The OMS 800 monitoring system consists of sensors, acquisition units, data concentrators for pre-processing the data, as well as a system server and software components for modern data visualization and management. An inductive power supply (IPS) allows operating the acquisition units offside, e.g. in cable tunnel applications where copper wiring has to be avoided and voltage sources are not available.

  • Intelligent pre-processing of the raw data by concentrator unit
  • Advanced data separation by synchronous multi-channel (3PARD) and multi-spectral (3CFRD) evaluation
  • Data post-processing by expert system to get useful information about insulation conditions
  • Diverse HFCT sensors for installation at groundings or cross-bonding boxes
  • Inductive power supply (IPS) for offside supply of units
Applications 
  • Monitoring of partial discharge phenomena at cable systems (High-voltage cable and accessories)
  • Maintenance of HV assets (service)
 
Marke Elektronik 2016 © All Rights Reserved.
TR - EN 
Home Page >  High Voltage Test Systems > Energy Cable Monitoring Systems > OMS 800 System > 

OMS 800 System

OMS 800 System

OMS 800 System

The OMS 800 system is designed to perform partial discharge (PD) after-installation testing and continuous monitoring of HV XLPE cable systems, either in underground tunnels or at buried cables. It can detect and locate partial discharges in cables and accessories (joints, terminations) simultaneously.

The OMS 800 monitoring system consists of sensors, acquisition units, data concentrators for pre-processing the data, as well as a system server and software components for modern data visualization and management. An inductive power supply (IPS) allows operating the acquisition units offside, e.g. in cable tunnel applications where copper wiring has to be avoided and voltage sources are not available.

  • Intelligent pre-processing of the raw data by concentrator unit
  • Advanced data separation by synchronous multi-channel (3PARD) and multi-spectral (3CFRD) evaluation
  • Data post-processing by expert system to get useful information about insulation conditions
  • Diverse HFCT sensors for installation at groundings or cross-bonding boxes
  • Inductive power supply (IPS) for offside supply of units
Applications 
  • Monitoring of partial discharge phenomena at cable systems (High-voltage cable and accessories)
  • Maintenance of HV assets (service)
 
Marke Elektronik 2016 © All Rights Reserved.
TR - EN 
Home Page >  High Voltage Test Systems > Energy Cable Monitoring Systems > OMS 800 System > 

OMS 800 System

OMS 800 System

OMS 800 System

The OMS 800 system is designed to perform partial discharge (PD) after-installation testing and continuous monitoring of HV XLPE cable systems, either in underground tunnels or at buried cables. It can detect and locate partial discharges in cables and accessories (joints, terminations) simultaneously.

The OMS 800 monitoring system consists of sensors, acquisition units, data concentrators for pre-processing the data, as well as a system server and software components for modern data visualization and management. An inductive power supply (IPS) allows operating the acquisition units offside, e.g. in cable tunnel applications where copper wiring has to be avoided and voltage sources are not available.

  • Intelligent pre-processing of the raw data by concentrator unit
  • Advanced data separation by synchronous multi-channel (3PARD) and multi-spectral (3CFRD) evaluation
  • Data post-processing by expert system to get useful information about insulation conditions
  • Diverse HFCT sensors for installation at groundings or cross-bonding boxes
  • Inductive power supply (IPS) for offside supply of units
Applications 
  • Monitoring of partial discharge phenomena at cable systems (High-voltage cable and accessories)
  • Maintenance of HV assets (service)
 
Marke Elektronik 2016 © All Rights Reserved.